Go | New | Find | Tools |
|
RE:
removing a hammer (in Gunsmithing) by Papa Dick, I have also seen it done that way, you just have to be careful. One fellow also made a tool th...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing
RE:
removing a hammer (in Gunsmithing) by PapaYou want the punch to be big enough to fit the square shank and NOT go into the threaded hole. The l...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing
RE:
Northwest gun rear sight (in Gunsmithing) by PapaJared, It sounds as though you are on the right track. Shooting any firearm well requires a lot of p...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing
RE:
Northwest gun rear sight (in Gunsmithing) by PapaJared, Before you put any sight on your NW gun, remember that to use it in smoothbore competition yo...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing 39th ANNUAL OHIO LR SHOW (in Events and Clubs) by PapaLafayette Hotel in Marietta this weekend will hold the 39th annual OHIO LONGRIFLE COLLECTORS show. O...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Events and Clubs
RE:
What is your favorite book? (in History) by PapaAny and all of the Allan Eckert books. All historic novels on the Ohio Valley and the middle ground....... MUZZLELOADER Magazine > The Campfire: Main Forum List > History
RE:
my gun ate my ramrod (in Firearms) by Papahuninguy, All the previous advise is all good, I would also soak the bore and patch with soapy water...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Pre-Dixie, Kirkland rifle (in Firearms) by PapaNotchy Bob, Thanks for the site information. The proof marks match the Belgian proofs of 1852, Liege...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Pre-Dixie, Kirkland rifle (in Firearms) by PapaNotchy Bob, Boy am I embarassed, thank you for making me do my homework. I pulled the barrel this ev...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Pre-Dixie, Kirkland rifle (in Firearms) by PapaI've been shooting .40's for 25 years or more even my table guns are in .40. I October I shot a 10 s...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Pre-Dixie, Kirkland rifle (in Firearms) by PapaBob, I haven't pulled the barrel to see if there is anything under the stock but besides the name an...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms Pre-Dixie, Kirkland rifle (in Firearms) by PapaCame up with a pre Dixie Gun Work rifle today marked Turner Turner Kirkland Union City, Tenn that I ...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
smoothbore... or, a funny thing happend in Monroe (in Firearms) by PapaHuntinguy, Sounds like you picked yourself up a nice fowler barrel but I'm not sure about a grouse g...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Hopkin and Allen Underhammer (in Gunsmithing) by PapaJust finished mounting the sights on a new table gun today amd am also looking forward to getting so...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing
RE:
Hopkin and Allen Underhammer (in Gunsmithing) by PapaWalking Crow, 3 screws, 2 in the action and 1 at rear of trigger guard, and the whole thing comes ap...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Gunsmithing
RE:
Iron sights (in Firearms) by PapaB. If you've already drawn a picture of what they are supposed to see when they look down the sights...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
.40 Underhammer Slug Gun (in Firearms) by PapaWalking Crow, I would reccomend mounting any peep on the barrel as opposed to the action. If you rem...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
.40 Underhammer Slug Gun (in Firearms) by Papaease, Sounds like a slug, or bullet, gun to me. Mark... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
.40 Underhammer Slug Gun (in Firearms) by PapaPease, A good buy regardless, even for just parts. Some of these rifles were made for roundball inst...... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms
RE:
Underhammers ? (in Firearms) by PapaPaul, Thanks for the help by posting the pictures. The ROT on the barrel above should be 1-56. Mark... MUZZLELOADER Magazine > The Campfire: Main Forum List > Firearms | » Refine Search » New Search |
| Powered by Social Strata | Page 1 2 3 4 |
 | Please Wait. Your request is being processed... |
2014 Historical Enterprises, LLC