Page 1 2 3 
Go
New
Find
Notify
Tools
Reply
  
Sand Casting
 Login/Join
 
Booshway
Picture of captchee
posted Hide Post
dont know for sure as i have never tried it . That being said , I would think it would depend on the mould . It would have to seal better then a standard ball mould and it would have to be of metal not brass as a brass mould probably wouldn’t hold up to long considering the melting point of pure silver is very near the melting point of brass .
But if your mould is tight and made of steel then it should cast a silver bullet .
Brass one might work for a one time quick deal
 
Posts: 687 | Location: Payette ,Idaho | Registered: 23 November 2004Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3  
 


2014 Historical Enterprises, LLC