21 February 2012, 10:27 AM
LeeRoyPistol Loading Stand
I was in need of some way to hole my pistol. While traveling on the web, I saw a few, so I put some pieces of wood together and ended up
with this stand.
Any comments welcome.
LeeRoy
21 February 2012, 10:34 AM
LeeRoyI can only attach one photo at a time, so here is another photo of my loading stand.
Any comments welcome.
LeeRoy
21 February 2012, 02:09 PM
DaveHey that's very good LeeRoy. I like it...think I'll do one of those myself. Do you happen to have plans/dimensions?
21 February 2012, 02:31 PM
BCRThat turned out great and it looks really functional.
BC
21 February 2012, 05:00 PM
LeeRoyThanks for the replies.
Dave No real plans, I just did a search on the inter-net and saw a few on different sites.
I made the base 4"W X 10"L and the Riser 4"W X 4 1/2" H. The notch to hold the pistol was started with a 1 1/2" hole saw, with the top part cut off.
The riser is not attached to the base.
The rest is just to your taste.
LeeRoy
22 February 2012, 07:11 AM
B StaleyI like it, it looks good. I just load the cylinder while it’s out of the frame. Might have to make one. Thanks for the pictures......B Staley
22 February 2012, 12:16 PM
HanshiGreat idea and well done. That surely beats loading a c&b revolver free hand.
23 February 2012, 12:18 PM
LeeRoyThanks for the replies.
Yes, I tried loading while holding the revolver with my hands and it was no fun.
LeeRoy